LittleGiant TreeHaus Camping Trailer


The LittleGiant (LGT) TreeHaus Camper is a modular cargo, utility, and camping trailer system ideal for use as the all-in-one adventure solution. Enjoy the performance-driven construction and pick up bed functionality of the LittleGiant Trailer for hauling all your gear on the highway or the high country, while converting into our roomiest tent trailer at your destination. Featuring lightweight aluminum deck panels and fittings for extending outward from each side of the trailer bed, and a domed tent design with ample standing height, the LGT TreeHaus Camper provides great sleeping and living space for four people and gear.

  • LittleGiant TreeHaus™ Camper Includes: LittleGiant Trailer™, two 84”L x 22”W aluminum deck panels with mounting hardware and storage hardware, end gate camper retrofit hardware, TreeHaus tent shelter
  • Dimensions: 84”L x 101”W x 82”H (camper bed setup); 121”L x 74”W x 42”H (overall trailer with TreeHaus system stored inside)
  • Weights: 420 lbs (LittleGiant Trailer), 80 lbs (TreeHaus Camping System)
  • Payload capacity: 1,500 lbs; G.V.W.R: 2,000 lbs
  • Easy Setup: The TreeHaus tent secures over the deck panels and around the trailer perimeter with heavy-duty velcro. The canopy sleeves and eight fiberglass body poles are color coded to aid in set up. The rainfly simply pulls over the canopy and attaches with hook and loop
  • Compact Storage: The tent and the poles are conveniently stored in a small canvas bag weighing 20 lbs, while the two 26 lbs lightweight aluminum deck panels store vertically along the inside side walls of the trailer bed. With the decks compactly stored, the trailer bed interior is available for transport camping, recreation equipment, travel and related lifestyle goods
  • TreeHaus Shelter: Includes tent canopy with rainfly, ten fiberglass body and awning poles, tie-in tent tubing for secure cordless attachment of tent and rainfly to trailer, tie-outs with ground stakes for weather reinforcement, gear loft for flashlights and personal items, Power Port passageway for electrical cords in and out
  • Spacious Interior: The foot print of the TreeHaus tent is the trailer bed and installed deck panel wings that in total measure 101”W x 84” long for 60 sq. ft of living space. Additionally, each end gate fits across the inside width of the trailer body for an expansive 48”L x 101”W raised sleep and living surface way above the ground!
  • Extra Tall: The domed tent gives the interior a special, open and airy feel and the center of the tent is 6’10” high for plenty of headroom
  • Open Breathable Design: Zippered combination screen doors are on each end of the camper, with large mesh bay windows on the sides. The storm fly can be removed revealing a natural skylight roof to let the sun and stars shine in. Finely screened opening keep out bugs and lets in fresh air for great ventilation and beautiful views
  • Tent Canopy: The shelter fabric is made of durable polyester with a 185-denier rated nylon ripstop. A polyurethane coating gives the fabric a 2,000mm PU waterproof rating for a lifetime of use. This is about three times the waterproof rating of a typical tent bought at a sporting goods store
  • Rainfly: 185-denier polyester nylon coated with a 2,000mm polyurethane waterproof rated storm fly clips over the tent for great weather protection and added heat retention
  • Large Bay Windows: Zippered screened bay windows on both sides of the trailer for breezy ventilation, daydreaming, and sight-seeing
  • Trailer Bed Dimensions: 86” L x 54” W x 24” H solid-walled trailer bed interior carries all forms of cargo, from light-duty industrial equipment, construction material and personal travel and lifestyle gear
  • All-galvanized steel construction with black powder coat finished sheet metal body for lifelong durability, 12ga. x 2” frame tubes, and 18ga. floor, sidewall, end gate sheet metal
  • Integrated C-Channel track on sidewalls for cargo management and modular attachments (88” x 1.625” x 13/16”)
  • Removable front and rear end gates
  • Torsion axle with grease zert bearing lubrication for independent, quiet, rubber dampened suspension, structural body strength, and low maintenance
  • 13 inch silver rim, 24in diameter tires (ST175-80D-13 load range B); 5 x 4.5 bolt hole pattern
  • Jeep style steel Fenders with black powder coat finish
  • A-Frame drawbar for strength and load stability with 2” coupler, 30 lbs tongue weight
  • LED 4” red square stop, turn, taillights with license plate illumination EPDM shielded wire harness with 4-flat electrical plug
  • Trailer marine swivel jack, height adjustable with 5” castor wheel, 1000 lbs rated
  • Swing down stabilizer leveler jacks for mobility and stability both on and off the hitch (12”-18” extended, 650 lbs capacity per jack)
  • 15 inch ground clearance for 13 to 15 inch recommended ball height (tow ball not included)
  • Rated for Class I towing or higher
  • Complete bolt-together kit, assembly required



Trailer Bed Dimensions
86"L x 54"W x 24"H
Overall Dimensions
119"L x 70"W x 41"H
Tent Camper Dimensions
86"L x 101"W x 86"H
Ground Clearance
Couple Height
15-17" (recommended)
13" (24" Diameter) Tires
Hub Bolt Hole Pattern
5 x 4.5 Hub Bolt Hole Pattern
2" (uses 2in ball size, not included)
End Gates
54"W x 24"H ea
Swing Down Stabilizer Jacks
16" - 22.5" Extended
Camper Deck "Side Panels"
86"L x 22"W ea


Curb Weight

480 lbs

Payload Capacity
1,500 lbs, Three-quarter ton cargo
1,950 lbs
Tongue Weight
30 lbs
End Gates
26 lbs ea
Camper Deck "Side Panels"
26 lbs ea
TreeHaus Tent (only)
24 lbs ea


18 ga sheet metal steel over 12 ga "box truss" frame
Body Finish
Black powder coat Over galvanized metal finish
Hardware Finish
Black Trivalent
Accessory Mounting 
84" x 1.625" x 13/16" c-channel track integrated on top of sidewalls
End Gates
Front & rear quick removal End Gates included
Torsion axle with Sure Lube grease bearing system, made in USA
Wheels & Tires
24" diameter tires, 13" black rims
Jeep style black powder coated steel 
LED Combination (stop, turn, tail, side), license plate illuminator with reflector
EDPM sheathed harness, 4-flat wire plug connector
Tongue & Coupler
A-frame draw bar, 2in coupler with safety cables
Includes Trailer Swivel Jack


Tent Design
Large Mesh Sky, & Doorway Views. Zippered Doors on both sides, Rainfly, 8 Fiberglass Body Poles for Domed shaped interior (plus 4 awning poles)
Tent Fabric
Water-proof 2,000 pu rated polyester with 185 Nylon Ripstop
Side Platforms 
Two (2) Aluminum Deck Panels
Tie-Outs & Tie-ins
Gear Loft
Power Port for Electrical
Height Adjustable Marine Swivel with 5in Caster, 1,000lbs rated






Sleeping Capacity


86"L x 101"W x 82"H

86"L x 101"W x 78"H

86"L x 54"W x 60"H

Main Body Tent Poles




Height (inside)

6' 10"

6' 6"

Sloped 24” to 60” Front To Rear

Average Set-up Time

25 MIN

15 MIN



Front, Rear, Bay Side Windows

Front & Rear

Door & Sides


Front & Rear

Front & Rear

Rear Only


Includes Hardshell Hexcap Cover

Expansion Decking

Basement Storage
24" x 54" x 86"

Has 2nd Level

Includes Levelers

Port for Electrical

ArcHaus Compatible

Interior Views



Ships unassembled, palleted via freight truck.

Shipping times are not guaranteed. If you would like expedited shipping please call our office at (719) 630-3800 for availability and a custom quote. See Shipping Policies for details about shipping and receiving.