
This complete system is fully-loaded with the SpecOPS AnyRoad Trailer, SummitHaus Tent, and Decking Kit.
The SpecOPS AnyRoad Trailer is our high payload trailer model that was designed for hauling gear and camping equipment to the remote Colorado mountains. We built a trailer that can be hooked up to a 4x4 and go anywhere the 4x4 can drive. The 20” clearance and the 29” all-terrain light truck tires makes it possible to take this trailer on the most rugged, off-road locations. With this complete system, it is now possible to camp at a remote trout stream, set up a base camp for mountain climbing expeditions or just to take the family camping at the State Park.
Assembly required. Sold and ships in kit form.
The completes system uses a camper platform consisting of our SummitHaus tent and decking components to set up the expansive interior. Like our TreeHaus Camper, the interior uses a set of Deck panels and fittings for platform wings that extend off the trailer siding, and a tent which sets up around the perimeter of the camper bed.
Measurements | |
Trailer Bed Dimensions | 86"L x 54"W x 24"H |
Overall Dimensions | 119"L x 74"W x 46"H |
Tent Camper Dimensions | 86"L x 101"W x 80"H |
Ground Clearance | 20" |
Couple Height | 23" (recommended) |
Tires | 29" light truck radial tires |
Hub Bolt Hole Pattern | 5 x 4.5 Hub Bolt Hole Pattern |
Coupler | 2" (uses 2in ball size, not included) |
End Gates | 54"W x 24"H ea |
Camper Deck "Side Panels" | 86"L x 22"W ea |
Weights | |
Curb Weight |
540 lbs |
Payload Capacity | 2,000 lbs, Three-quarter ton cargo |
G.V.W.R. | 2,540 lbs |
Tongue Weight | 35 lbs |
End Gates | 26 lbs ea |
Camper Deck "Side Panels" | 26 lbs ea |
Submit Tent (only) | 22 lbs ea |
Structurals | |
Metal | 18 ga sheet metal steel over 12 ga "box truss" frame |
Body Finish | Black powder coat Over galvanized metal finish |
Hardware Finish | Black Trivalent |
Accessory Mounting | 84" x 1.625" x 13/16" c-channel track integrated on top of sidewalls |
End Gates | Front & rear quick removal End Gates included |
Axle | Torsion axle with Sure Lube grease bearing system, made in USA |
Wheels & Tires | 24" diameter tires, 13" black rims |
Fenders | Jeep style black powder coated steel |
Lights | LED Combination (stop, turn, tail, side), license plate illuminator with reflector |
Wiring | EDPM sheathed harness, 4-flat wire plug connector |
Tongue & Coupler | A-frame draw bar, 2in coupler with safety cables |
Jack | Height Adjustable Marine Swivel with 5in Caster, 1,000lbs rated |
Levelers | Included |
Structurals (Tent) |
|
Tent Design | Mesh Sky, Bay Windows, & Doorway Views. Zippered Doors on both sides, Rainfly, 8 Fiberglass Body Poles for Domed shaped interior (plus 4 awning poles) |
Tent Fabric | Water-proof 2,000 pu rated polyester with 185 Nylon Ripstop |
Side Platforms | Two (2) Aluminum Deck Panels |
Tie-Outs & Tie-ins | Included |
Gear Loft | Included |
Power Port for Electrical | Included |
Ships unassembled, palleted via freight truck.
Shipping times are not guaranteed. If you would like expedited shipping please call our office at (719) 630-3800 for availability and a custom quote.